Cleat,Super Heavy Duty 10" Cleat Cast Stainless 5 LB..

Details 

CLOSEOUT--SUPER CLEAT 10" HEAVY DUTY STAINLESS STEEL LIMITED QTY. WT.= 5 lb. WHILE QTYS.LAST

Clevis Pin 1/4" x 1/2" With Circular Ring.

Details 

These Pins Will Fit 1/4 Turnbuckles

Clevis Pin 3/16"Dia.x 13/32"& Circular Pin.

Details 

These pins are used on the Daysailer, Javelin & Widgeon! These Pins will not work on Upgraded Rigging With Full Size Turnbuckles. See 1/4" Clevis Pins.

COCKIPT STERN FACER/CUP HOLDER PLEXI.

1/4" SMOKED PLEXI FOR CUP HOLDER BULIT-IN (COCKIPT STERN FACER)

Cockpit Drain 1-1/2" x 100 Degree.

Details 

Low Profile Head Allows Excellent Drainage

Cole Hersee 75 Amp Battery Isolator Model #48051.

Details 

Closeout Item Whiles Qtys.Last Condition New

Combination Opening Ports (pr).

Details 

OD: Top - 7 3/4" x 25 1/4", Bottom - 7 3/4" x 29 3/4"

CUTLASS BEARING 1-1/4" X 1-3/4" X 5".

Details 

SPARTAN BRASS SHELL BEARING 1-1/4" ID X 1-3/4"OD X 5" LENGTH (CODE DESK) THIS IS A CLOSEOUT PRICE! WHILE QTYS. LAST

CUTLASS BEARING 1-1/4" X 2" X 5".

Details 

TRELLEX MORSE MARINE BEARING 1-1/4" ID X 2" OD X 5" LENGTH (COD) THIS IS A CLOSEOUT PRICE! WHILE QTYS. LAST

CUTLASS BEARING 1-3/8" X 2" X 5-1/2".

Details 

SPARTAN BRASS SHELL BEARING 1-3/8" ID X 2"OD X 5-1/2" LENGTH (CODE EDAM) THIS IS A CLOSEOUT PRICE! WHILE QTYS. LAST

D/S R/F JIB SAIL W/LUFF TAPE FOR CDI FF1 FURLER.

THIS ROLLER FURLER JIB SAIL HAS A WHITE SACRIFICIAL UV COVER. 4 WEEK LED-TIME IS POSSIBLE

Daysailer & Javelin Boom End Cap Casting.

Details 

will fit booms that measure 1.75" x 2.75"

Daysailer & Javelin Mainsheet Boom End Sheeting.

Boom End Sheeting is 40 ft of 5/16" Line With Eye Splice

Daysailer Boom Complete w/Hardware.

Details 

This Item Can't Be Shipped By UPS Please Call For Freight Quote This boom does include the complete gooseneck

Daysailer Boom Downhaul Line.

Daysailer Boom Extrusion Only.

Details 

This Item Can't be Shipped by UPS-Please Call for Freight Quote

Daysailer Headstay Stemhead.

Details 

Also used on the Widgeon & Javelin

Daysailer I & II Forestay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS Used on D/S I & II ONLY!

Daysailer I & II Forestay Uprgrade w/Fullsize TurnBuckle.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS This is for D/S I & II ONLY!

Daysailer I & II Forestay w/ New Quick Release Lever.

Details 

Daysailer I & II Rudder & Tiller Complete.

Details 

Daysailer I & II Only 1959-1982-1/2

Daysailer I & II Rudder Blade Only.

Details 

Fiberglass construction, white gealcoat finish! Used on D/S II 1971-1982-1/2

Daysailer I & II Rudder Head Complete With Pintles.

Fiberglass Construction

Daysailer I & II Rudder Head Only.

Details 

Fiberglass construction, white gelcoat. We also carry white rudder blade.

Daysailer I & II Rudder Pivot Bolt & Nut.

Stainless Steel Bolt & Locking Nut

Daysailer I & II Standing Rigging (3 Stays).

Details 

We have upgraded to 1/8" wire 1x19 - 316SS This is used on D/S l & ll ONLY!

Daysailer I & II Standing Rigging Uprgrade w/Fullsize TurnBuckles - Complete Set.

Details 

Used on D/S I & II ONLY!! We have upgraded to 1/8" wire 1x19 - 316SS - Complete 3 pc. set!

Daysailer I & II Tiller Only 48"Long.

Details 

Made from Solid Ash and Poly-Finish (48" Long) Daysailer I & II 1959-1982

Daysailer I Centerboard Only.

Details 

Daysailer I,II & III Side Stay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS D/S I,II,& III

Daysailer I,II & III Side Stay Upgrade w/Turnbuckle - (PR).

Details 

We have upgraded to 1/8" wire 1x19 - 316SS - Comes as a set!

Daysailer II & III C/B Cable Assy..

Details 

Daysailer II & III C/B Pivot Pin.

Machined from Delrin Also used on D/S II 1981 & up

Daysailer II & III C/B Tang SS.

Details 

Daysailer II & III Centerboard Only.

Details 

Comes with no hardware or pivot hole.

Daysailer II & III Rudder & Tiller Complete.

Details 

Aluminum Rudder Head Complete with Pintles, Fiberglass Kick-Up Blade and Solid-Ash Tiller. Used also on O'day 15 1981 & up / DSII 1983 & up, Javelin 1984 & up.

Daysailer II & III Rudder Blade Only.

Fiberglass Construction Also used on D/S II 1983 & up

Daysailer II & III Rudderhead Complete.

Aluminum Rudderhead - Complete with Pintless Also used on D/S II 1983 & Up

Daysailer III Forestay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS Used on D/S III ONLY!

Daysailer III Standing Rigging Uprgrade w/Fullsize TurnBuckles - Complete Set.

Details 

Used on D/S 3 ONLY!! We have upgraded to 1/8" wire 1x19 - 316SS - Complete 3 pc. set!

Daysailer III Tiller Only 43".

Made from Solid-Ash with Poly-Finish.

Daysailer III Tiller With Clam Cleat.

Made From Solid-Ash with Poly-Finish

Daysailer Jib Car Pair (Adjustable).

Details 

Swiveling Cars come complete with 12" jib tracks. Used on Javelin & Daysailer

Daysailer Jib Halyard Complete w/Shackle.

Details 

We use New England Sta-Set 1/4 Blue Flex and splice on a 316 SS halyard shackle. Other colors are avalibile.

Daysailer Jib Sail Only Neil Pryde.

Daysailer Jib Sheets.

Daysailer Jib Tracks 12".

Details 

Daysailer Main Halyard Complete w/Shackle.

Details 

We use New England Sta-Set 1/4" Color Red Flex Sliced on to 316 SS Halyard Shackle.. Other colors are avalibile.

Daysailer Main Sail Only with Battens Neil Pryde.

Mainsail w/ Insignia and 1 Reef and Battens

Daysailer Mainsail Outhaul Line.

Daysailer Mast Complete w/all Hrdw less Rigging.

Details 

Daysailer Mast Complete w/all Hrdw less Rigging. This product is too large to ship UPS. Please call for freight pricing.Dimensions 2.12in. wide 2.84in Deep (Lengths are 24' 1" on D/S II and 24'7" on D/S I)

Daysailer Mast Complete with Hrdw and Rigging.

Details 

Daysailer Mast Complete w/ Hardware and Rigging. This product is too large to ship UPS. Dimensions 2.12in. wide 2.84in Deep (Lengths are 24' 1" on D/S II and 24'7" on D/S I)Please call for freight pricing to your area.

Daysailer Mast Extrusion Only.

Details 

Daysailer Mast Extrusion Only With Sail Feed.Dimensions 2.12in. wide 2.84in deep. (D/S I Extrusion 24'7" & D/S II is 24'1") This product is too large to ship UPS. Please call for freight pricing.

Daysailer Mast Step Casting.

Details 

Daysailer Mast Tabernacle D/S I & II.

Details 

This product is not recommended if your Daysailer is on a mooring. Call Rudy@ D & R to Discuss.

Daysailer Mast Tabernacle D/S II & III.

This was use on the newer D/S 2 1982-1986 and D/S 3 1987-1989 Deck Stepped Mast ( No Hole Thru The Deck)

Daysailer Masthead Complete with sheave.

Details 

Daysailer Mid-Boom Mainsheet with Boom Block.

Daysailer Mid-Boom Mainsheet Only (Opt.4:1).

This mainsheet is to be used with the 4:1 system 3/8" x 32' Std color red flex

Daysailer Mid-Boom Mainsheet Only(Std.3:1).

This is for mid boom sheeting. Line is 3/8" x 25 ft. with eye splice. STD color red flex

Daysailer Sail Battens (Set of 4).

2 Battens @ 40" 2 Battens @ 30" Fiberglass diamond shape

Daysailer Sails Main & Jib with Battens & Bag N/P.

Mainsail w/Insignias & 1 Reef & window in the Jibsail

Daysailer Self Bailer D/S II & III.

Details 

This item is in stock as of 1/15

Daysailer Sidestay Mast Tang.

Details 

Daysailer Spreader Bar Heavy Duty (Ea).

Details 

5/8" X 21-1/4" New Extra Heavy Duty Alum. 5/8"Round Tube to 1/2" Square End Used on D/S I,II & III The price reflects 1 Each Not a Pair

Daysailer Spreader Bar Alum. 1/2" X 21-1/4"(Ea).

Details 

New For 2018 Heavy Wall Spreaders 1/2"OD x 21-1/4" Long Used on D/S I,II,& III Twice the thickness as the original! The price reflects 1 each not a pair!

Daysailer Teak Cuddy Doors.

Details 

FOR DAYSAILER 2 & 3 only for year 1974 and up These are with 1/2"Teak Veneer Plywood (Marine Grade) PLEASE ALLOW 2-3 WEEKS FOR DELIVERY

Daysailer Topping Lift Kit.

KIT CONTAINS 1 DR908 Cheek Block w/Fasteners 1 3-1/4" CLEAT W/FASTENERS 50 FT 1/4" STA-SET WITH SHACKLE SPLICED ON

Daysailer U Channel for Cuddy Door opening.

Details 

Deck Light 4 1/4" Plexi.

Details 

Used primarily on O'day 28, 30, 31, 34, 35 & 37! Smoked plexi-glass with a diameter of 4 1/4".

Deck Organizer, Double 1.

Details 

Made with ball bearing sheaves: - L: 5 1/8", W: 2", & sheave diameter: 2"

Deck Organizer, Double 2.

Details 

Made with ball bearing sheaves - L: 6 1/4", W: 2 5/8", & sheave diameter: 2 5/8"

Deck Organizer, Double Stack 3.

Details 

Made with ball bearing sheaves - L: 6 1/4", W: 2 5/8", & sheave diameter: 2 5/8"

Deck Organizer, Triple 1.

Details 

Made with ball bearing sheaves - L: 9 1/8", W: 2 5/8", & sheave diameter: 2 5/8"

Deck Organizer, Triple 2.

Details 

Made with ball bearing sheaves - L: 9 1/8", W: 2 5/8", & sheave diameter: 2 5/8"

Deck Organizer, uQuad 1.

Details 

Made with ball bearing sheaves - L: 12 1/8", W: 2 5/8", & sheave diameter: 2 5/8"

Deluxe Instrument Panel Box.

Details 

Deluxe Instrument Panel Box, Including Plexi Sliding Doors! Use primarily on O'day 39, O'day 40, Cal 33 & Cal 39--Measurements Cutout 8-1/8"H x 16" Long Overall 9-7/16"H x 17-1/4"L

Downhaul Cleat 3-1/4".

Details 

Drain Plug to Drain Inner Hull (2 pc) FITS 1" HOLE.

Details 

2 pc. black plastic-plug with housing size 1"- This plug is to drain the water between the hull and the deck. (Primarily used on Javelin, Widgeon & Daysailer)

Drain Plug to Drain Inside of Cockpit.

Details 

Fits into 1" brass tubing that goes thru the transom!

Edson 1201 Instrument Housing For One Instrument.

Details 

Fits One Standard Instrument up to 4.5" x 4.5" x 2.5" depth. Mounts to 1" or 1-1/8" Pedestal Guard.Color:White High-Gloss Molded Vinyl Laminate Construction.UV Resistant-won't fade or crack.

Edson 36"Destroyer Wheel 1" Straight Hub..

Details 

NEW CONDITION! - Boat Show Demo - Any Questions Please Call Rudy!

Edson 36"Destroyer Wheel Gray Leather Tapperd Hub.

Details 

This Wheel is also Dished Slightly--NEW CONDITION--Boat Show Demo --Any Questions Please Call Rudy

Edson 6" Bronze Sheave.

Details 

Closeout! ~ Limited Supply!

Edson Compass Cylinder Color Black.

Details 

Edson Closeout #856bk Fits Edson 335 & 336 Pedestal

Edson Davit Risers.

Please call for size & pricing Starting at $120.00 pr to $300

Edson In-Out Conduit 6" Idler.

Details 

Closeout Item!

Edson Instrument Pod Closeout.

Details 

Measurements From top to bottom 10 inches From Side to side 5.25 inches Depth 6 inches

Edson Pedestal Guard Feet Kit Only!.

Details 

Edson #310ST-100-125 Stainless Guard Feet - Comes with gasket and bushing - Allow for mounting 1", 1 1/8" or 1 1/4" guard pipes. (Nuts and washers included!)

Edson Pedestal Top Plate 8" White Poly.

Details 

Fits Edson's 400 Series Pedestal 8". Fits 1" & 1-1/8" Pedestal Guard. This also a closeout item! ... While quantities last.

Edson Pedestal Top Plate Stainless w/Gasket & Bushings.

Details 

Edson #1625ST-45 Top Plate Stainless Steel w/Bushings & Gasket for 335 & 336 Pedestal Fits 1" & 1-1/8" & 1-1/4" Pedestal Guard.

Edson Pull-Pull Conduit 853-250 4' ft. Section.

Details 

Edson Closeout!! -Comes in 4' Sections Only Longer Lenghts may be available. Please call Rudy @508-644-3001

Edson Radar Housing CloseOut.

Details 

Edson #884-1011 ~ Get One While They Last! ~ This is A CloseOut Item and Once They're Gone - They're Gone!

Edson Side Mount Clamp-On Platform.

Details 

Fits Pedestal Guards 1" & 1-1/8 Size=8" x 2-1/4" Closeout Item--While Qtys.Last

Edson Single Drink Holder White Poly.

Details 

Also this could be used for fog horn holder. Closeout Item--While Qtys. Last.

Edson Steerng Wheel Nut, 1"-14.

Details 

Stainless Steel Nut Edson #637ST-1-14

Edson Table Brackets (pr).

Details 

Cast Aluminum; Color: Off-White / sized for use with 1 inch tubing

Edson Table Hardware Kit.

Details 

Edson Table Mounting Clamp-On Set of 4.

Details 

EDSON 860-100 SS COLLAR BRACKET FITS 1"-1-1/4" GUARDS. WHAT AN UNBEATABLE DEAL!

Edson Transom Steering Rubber Boot.

Details 

Used on O'day 272 LE models! Also used on O'day 280 Also used on Pearson 27

Engine Strut w/Cutless Bearing.

Details 

Cast-Bronze (Need to specify gas or diesel engine) - Allow 4 weeks for delivery - Complete with cutlass bearing. - Primarily used on Pearson 10m & Old Pearson 36

Eye Strap.

Details 

Finger-Hole-Pull, Mahogany.

Details 

Another Closeout! This piece will add style and convenience to your everyday boating experience. Used on interior cabinet doors & draws! What a buy! Size: 1 3/8" ID X 1 5/8" OD

Fixed Mount Combonation Masthead/White All Around Light.

Details 

Perko

Forespar Marelon CF252 Straight Tailpipe 2"MT -2"H.

Details 

Forespar Marelon CF252 2" Tailpipe Straight 2" Male Thread to 2" ID Hose Barbs Part #905011 This is a closeout item and price is only good while Qtys.last

Forespar Marelon Elbow 2" 90 Deg.MT x 2" Hose.

Details 

Garhauer Cheek Block Dbl. Stacked SS Ball Bearing.

Details 

Series 25 Length =3.5" Width 1-3/4" Sheave Dia.1-3/4"

Garhauer Cheek Block Single SS Ball Bearing.

Details 

Length 3-1/2" x 2" Width Sheave dia. 1-15/16" Series 25

Garhauer Fiddle Block w/ Adjustable Shackle 1.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/ Cam Cleat & Swivel Shackle.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/ Snap Shackle 1.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/Cam Cleat & Snap Shackle & Becket.

Details 

All Stainless Steel Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/Cam Cleat & Swivel Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Genoa Block on Slide 1" Track.

Details 

Garhauer Mainsheet Standup Swivel Block w/ Cam Cleat.

Details 

All Stainless Steel Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/ Snap Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/ Swivel Shackle.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/Swivel Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Stand-Up Block, BB.

Details 

Anodized Grey Aluminum Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Gooseneck Casting Only For P26/P28.

Details 

Casting Only, No Drilled Holes

Gooseneck Casting only w/ Pin.

Details 

Fits boom that is 1.75" x 2.75"

Gooseneck Complete.

Details 

Fits Boom that is 1.75" x 2.75"

Gooseneck Slide Only.

Details 

Gooseneck Tack Bracket w/ Reef Hook.

Details 

Used primarily on O'day: Javelin, DS, Mariner, R19, O'19, O'192, O'20 & O'22 Includes the quick release pin

Gooseneck Tack Bracket w/ Reef Hook.

Details 

Used primarily on O'day: 23, 25 & 26! Includes the quick pin.

Gooseneck Tack Pin W/Roll Pin.

Gooseneck Universal Connector 3/4" x 3/4".

Groco PTH-2000 Bronze Pipe to Hose 2".

Details 

Groco PTH 2000 Bronze Pipe to Hose Adapter 2"Hose X 2" NPT Closeout Price While Qtys. Last

Groco Ball Valve IBV-1000 1" Bronze Body.

Details 

Closeout item.Pr.ice is good, while Qtys.last

Groco Ball Valve IBV-250 1/4" Bronze Body..

Details 

Groco Ball Valve IBV-375 3/8' Bronze Body.

Details 

Groco Ball Valve IBV-500 1/2"BRONZE BODY.

Details 

GROCO BALL VAVLE IBV-500 1/2" FULL FLOW

Groco BVH-2000 Seacock 2".

Details 

GROCO BVH-2000 SEACOCK FULL FLOW ROUND FLANGED BASE-STAINLESS STEEL BALL AND DRIVER.TOP CONNECTION 2-1/4" ID HOSE BOTTOM CONNECTION 2" NPS NEW CONDITION.CLOSEOUT ITEM WHILE QTYS. LAST

Gudgeon For 3/8" Pintle Stainless Steel.

Details 

4 Hole Gudgeon 5/8" x 4-1/8" Use 10-24 Machine Screws & Lock Nuts for mounting to transom. Used on O'day Widgeon,Javelin & Daysailer.

Halyard Organizer Plate.

Details 

This halyard organizer plate fits under existing stainless hinge plate. Comes in stainless steel, complete with 7 holes for attaching blocks. 6 1/2" x 4 3/8" Overall 7-3/4 x 6-1/4"

Halyard Organizer Plate A.

Details 

Includes 4 holes for block attachment. Width: 5.25" Length: 4"

Halyard Organizer Plate B.

Includes 6 holes for block attachment. Width: 4.4" Length: 6.5"

Handrail End Cap.

Details 

This cap is used on many O'day handrails.

Hatch Boards O'240 Smoked Plexi 2 Pc..

1/2" Plexi Color 2412 Dark Bronnze. Allow 2 weeks for delivery

Hatch Boards O'240 Teak Veneer 2Pc.

Teak Veneer Plywood 1/2" as per original specs. Allow 2 weeks for Delivery

Hatch Complete w/Screen Kit.

Details 

Overall Size: 19 1/8" x 19 3/8" Cut Out Size 16-7/8" x 16-7/8" This Hatch is used on O'day 192,222,240,26,& 272 Don't Forget to order Dow Corning Black Sealant. Part#DR11150

Hatch Latch.

Details 

Perfect for sliding companionway hatches. Stainless Steel Finish. - Fasteners not included.

Headstay / Sidestay Mast Tang.

Details 

Used primarily for Daysailer & Widgeon! This tang comes complete with 3 holes to attach to mast.

Headstay / Sidestay Mast Tang.

Details 

Used primarily for the Javelin! This tang comes complete with 4 holes to attach to mast.

Heavy Duty 6" T-Hinge Stainless (Ea).

Details 

Heavy Duty3" Safety Hasp 316 SS.

Details 

Heavy duty safety hasp with swivel pad eye, allows locking of hasp without the use of a lock. 316 Stainless Steel.

Heavy-Weight, Ultra Blend Tee / Sky Blue.

Details 

~ This sky blue tee-shirt is perfect for lounging! It may even look a little familiar to those who have been sailing with us throughout the past couple decades! A fantastic gift for her, him or even the kids! Sail, Sail, Sail!

Hinge 3" X 1-1/2" Stainless Steel (EA)).

Hinge -Closeout (Pr).

Details 

Hubbell HBLPHTVSS Phone/TV Inlet Round Stainless Steel.

Details 

This a Closeout Item and the price is only good while. Qtys. Last