Centerboard Handle Assy. Complete.

Details 

Primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Handle Only Cast Bronze.

Details 

Primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Handle Pressure Plate.

Details 

Cast Bronze Pressure Plate, Mounting Bolts Included! (3) Primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Locking Pawl for Handle.

Details 

Locking Pawl only - Cast Bronze (Needs to be fitted to handle and then drilled) Primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Mounting Plate for Handle.

Details 

This plate gets fiberglassed to the centerboard trunk. Primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Pivot Bolt w/Locking Nut.

Details 

Used on Daysailer, Javelin & Widgeon.

Centerboard Plates (pr).

Details 

These plates are used on many O'days - purpose is to hold CB wedges in the CB box.

Centerboard Rubber Washer 3" O.D..

Details 

For centerboard lever - Size: 3"OD x 1" Center Hole: 1/4" Thick Neoprene Rubber. This piece is primarily used on Daysailer I, older Javelins & Widgeons!

Centerboard Rubber Washers (pr).

Details 

Used on D/S ll ,Javelin,& Widgeon (2 of these are needed per boat) - These come paired! Size; 1-1/2" OD x 1/2" hole x 1/4" Thick

Clam Cleat.

Details 

Daysailer I & II Rudder & Tiller Complete.

Details 

Daysailer I & II Only 1959-1982-1/2

Daysailer I & II Rudder Blade Only.

Details 

Fiberglass construction, white gealcoat finish! Used on D/S II 1971-1982-1/2

Daysailer I & II Rudder Head Complete With Pintles.

Fiberglass Construction

Daysailer I & II Rudder Head Only.

Details 

Fiberglass construction, white gelcoat. We also carry white rudder blade.

Daysailer I & II Rudder Pivot Bolt & Nut.

Stainless Steel Bolt & Locking Nut

Daysailer I & II Tiller Only 48"Long.

Details 

Made from Solid Ash and Poly-Finish (48" Long) Daysailer I & II 1959-1982

Daysailer I Centerboard Only.

Details 

Daysailer II & III C/B Cable Assy..

Details 

Daysailer II & III C/B Pivot Pin.

Machined from Delrin Also used on D/S II 1981 & up

Daysailer II & III C/B Tang SS.

Details 

Daysailer II & III Centerboard Only.

Details 

Comes with no hardware or pivot hole.

Daysailer II & III Rudder & Tiller Complete.

Details 

Aluminum Rudder Head Complete with Pintles, Fiberglass Kick-Up Blade and Solid-Ash Tiller. Used also on O'day 15 1981 & up / DSII 1983 & up, Javelin 1984 & up.

Daysailer II & III Rudder Blade Only.

Fiberglass Construction Also used on D/S II 1983 & up

Daysailer II & III Rudderhead Complete.

Aluminum Rudderhead - Complete with Pintless Also used on D/S II 1983 & Up

Daysailer III Tiller Only 43".

Made from Solid-Ash with Poly-Finish.

Daysailer III Tiller With Clam Cleat.

Made From Solid-Ash with Poly-Finish

Gudgeon For 3/8" Pintle Stainless Steel.

Details 

4 Hole Gudgeon 5/8" x 4-1/8" Use 10-24 Machine Screws & Lock Nuts for mounting to transom. Used on O'day Widgeon,Javelin & Daysailer.

Rudder Pintle (Upper) with Safety Pin.

Details 

Pintle & pin are stainless steel. For 1-1/4" Rudders with 3/8"dia pin.Used on O'day Widgeon,Javelin & Daysailer1&2

Rudder Pintle 1-1/2"(Lower).

Details 

Heavy Duty Rudder Pintle Stainless Steel 1-3/4" Wide with 3/8" pin

Safety Pin for Rudder.

Details 

Made of Stainless Steel.

Tiller Bolt & Nut.

Details 

Stainless Steel Bolt and Wing Nut (Includes 2 SS Washers) - Used on Daysailer & Javelin

Tiller-Tamer.

Details 

This unique piece installs easily to inboard & outboard rudder tillers and gives smooth and adjustable tension from fully locked to fully loose. Be hands-free no matter the weather conditions.